Body & Interior
944 Turbo Bumper Cover Removal
CG
This guide is preserved from Clark's Garage, a foundational 944 resource. View the original →
Tools you'll need
No special tools required — basic hand tools should cover it.
See the full tools list for where to buy each one and budget alternatives.
Tools
- Phillips Head Screwdriver
- Metric Socket Set
- Floor Jack and Jack Stands
Procedure
- Raise the front of the vehicle on jack stands.
- Remove the belly pan.
- Remove the trim panel from the bottom of the bumper cover.
- Remove the turn signals and fog lights.
- Using a 10mm socket and ratchet, remove the bolts located on either side of bumper cover that attach it to the front fenders.
- Remove the two bolts near the center of the bumper cover (10mm). They can be located by looking up between the bumper cover and A/C condenser.
- Slide the bumper cover off the front of the car.