Suspension
Front Sway Bar Removal and Installation
CG
This guide is preserved from Clark's Garage, a foundational 944 resource. View the original →
Tools you'll need
No special tools required — basic hand tools should cover it.
See the full tools list for where to buy each one and budget alternatives.
Tools
- Metric Wrench Set
- Metric Socket Set
- Jack Stands
- Floor Jack
Procedure
- Raise the front of the vehicle on jack stands.
- Remove the belly pan.
- Remove the two bolts that attach each stabilizer mounting bar to the body.
- Remove the bushing retainers that attach the stabilizer bar to the control arms.
- Lower the stabilizer bar from the vehicle.
- Installation is the reverse of removal.